| Customization: | Available |
|---|---|
| After-sales Service: | Online Support Through Email, Telephone, Whatsapp |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ASTM D2500 Widely Use Petroleum Products Cold Filter Plugging Point Test Machine
The multi-functional low temperature analyzer is easy to operate and the detection methods conform to ASTM D97, ASTM D2500, and national standards GB / T 510, GB / T 3535, GB / T 6986, SH / T 0248.
The instrument is suitable for measuring the freezing point, pour point, cloud point and cold filtration point of petroleum products. Put the sample into the test tubes that are equipped with the instrument, and then cool the temperature of the cold bath to the expected temperature through the compressor to keep it constant. Then you can carry out the test according to the test methods required by the above standards.
Main Technical Parameters and Features
1.Working power: AC220V, 50Hz.
2.Test unit: two groups; one slot and two holes, which can be tested separately or simultaneously.
3.Temperature control mode: intelligent digital PID temperature control, digital display timing alarm.
4.Temperature control range and accuracy: room temperature to -40 ± 0.1 ºC.
5.Refrigeration method: imported Danfoss compressor refrigeration. It has the characteristics of high cooling depth, fast speed and stable performance.
6.Control mode: The intelligent digital display meter is used to directly control the heater to achieve balance with the refrigeration. The temperature display is intuitive and the control accuracy is high.
7.Stirring mode: The motor drives the stirrer to stir to make the temperature in the bath uniform, thereby solving the inaccuracy of the test results caused by temperature differences.
8.The instrument is equipped with electronic digital automatic timer.
9.The instrument is equipped with cold filtration point suction filter device and pump:
1) input power: 0.1KW;
2) pressure difference adjustment range: 0-240mm water column;
3) control mode: electric control.
10.The pour point, freezing point, cloud point and cold filter point accessories are all configured according to national standards or industry standards. The experiment can be carried out as soon as the instrument has arrived.
11.Thermometer: In accordance with GB / T 514 Technical Conditions for Liquid Thermometers for Testing Petroleum Products.
12.Medium in the low temperature bath: absolute ethanol.
I.General Petroleum Products Testers
1. Karl Fisher Oil Water Content Tester BLS-6304
2.Digital Oil Moisture Meter BLS-D6304
3.Petroleum Products Kinematic Viscosity and Viscosity Index Tester BLS-445
4.Digital Kinematic Viscosity Meter BLS-D445
5. Fully Automatic Petroleum Products Acidity Meter BLS-974
6.Cleveland Open Cup Flash and Fire Point Tester BLO-92
7.Pensky-Martens Closed Cup Flash Point Tester BLC-93
8.Pour Point and Cloud Point Tester BLS-97
9.Petroleum Products Density Meter BLS-1298
10.Copper Corrosion Tester BLS-130
11.Petroleum Products Aniline Point Tester BLS-611
12.Petroleum Products Colorimeter BLS-1500
13.Petroleum Products Carbon Residue Tester (Micro Method) BLS-4530
14.Petroleum Product Vapor Pressure Tester (Reid Method) BLS-3231
15.Total Acid Number and Total Base Number TAN/TBN Tester BLS-2896
16.Petroleum Products X-ray Fluorescence XRF Sulfur Analyzer Sulfur BLS-4294
17.Petroleum Products Online Moisture Meter BLS-PPM
18.Online Moisture ppm Meter/ Particle Counter/ Pollution Degree Analyzer NAS-01
19.Petroleum Products Saponification Number Tester BLS-94
20.Micro Coulometry Sulfur and Chlorine Content Tester BLS-3120
21.Ultraviolet Fluorescence Sulfur Analyzer BLS-5453
22.Conradson Method Petroleum Products Carbon Residue Tester BLS-189
23.Ramsbottom(Electric Furnace) Method Petroleum Products Carbon Residue Tester BLS-524
24.Hydrogen Sulfide in Liquefied Petroleum (LP) Gases Tester (Lead Acetate Method) BLS-2420
25.Hydrocarbon Types in Petroleum Products Tester by Fluorescent Indicator Adsorption BLS-1319
II. Specialized Oil Testers
i.Lube Oil Testers
1. Anti-rust Grease Salt Spray Corrosion Tester BLS-117
2.Lube Oil Air Release Value Tester BLS-3427
3.Petroleum Products Demulsification/Water Separability Tester BLS-1401
4.Vehicle Gear Oil Channel Point Tester BLS-0030
5.Lube Oil Oxidation Stability Tester (Rotary Oxygen Bomb Method)BLS-942
6. Lube Oil Foaming Characteristics Tester BLS-892
7.Petroleum Products Ash Content Tester BLS-482
8.Petroleum Products and Additives Mechanical Impurity Tester BLS-473
9.Liquid Phase Corrosion/ Rust Preventing Characteristics Tester BLS-665
10.Automatic Lubricating Oil Grease Four-ball Friction Tester BLS-2783
11.Lubricating Grease Sulfated Ash Content Tester BLS-874
12.Water Content Tester by Distillation BLS-95
13.Petroleum Products Water Soluble Acid and Alkalis Tester BLS-259
14.Engine Oil CCS Cold Cranking Simulator/Apparent Viscosity Tester BLS-5293
15.Noack Method Lubricating Oil Grease Evaporation Loss Tester BLS-5800
16.Lubricating Oil Grease Evaporation Loss Tester BLS-972
17.Lubricating Oil Insolubles Tester BLS-893
18.Inhibited Mineral Oils Oxidation Characteristics Tester BLS-943
19.Dropping Point Tester of Lubricating Grease Over Wide Temperature Range BLS-2265
20.Pressure Differential Scanning Calorimetry (PDSC) Lubricating Oil Oxidation Induction Time Tester BLS-6186
21.Lubricating Grease Dropping Point Tester BLS-566
22.Lubricating Grease Cone Penetration Tester BLS-217
ii.Insulating Oil/Transformer Oil Testers
1. Karl Fisher Transformer Oil Water Content Tester BLS-6304
2.Digital Oil Moisture Meter BLS-D6304
3.Automatic Transformer Oil Kinematic Viscosity and Viscosity Index Tester BLS-445
4.Automatic Transformer Oil Kinematic Viscosity Meter BLS-V445
5.Transformer Oil Acidity Meter BLS-974
6.Transformer Oil Cleveland Open Cup Flash and Fire Point Tester BLO-92
7.Manual Type Transformer Oil Cleveland Open Cup Flash and Fire Point Tester BLO-M92
8.Transformer Oil Pensky-Martens Closed Cup Flash Point Tester BLC-93
9.Manual Type Transformer Oil Pensky-Martens Closed Cup Flash Point Tester BLC-M93
10.Transformer Oil Pour Point and Cloud Point Tester BLS-97
11.Transformer Oil Density Meter BLS-1298
12.Digital Transformer Oil Density Meter BLS-D1298
13.Transformer Oil Colorimeter BLS-1500
14.Transformer Oil Breakdown Voltage/ Dielectric Strength Tester BDV-165
15.Dielectric Loss/ Volume Resistivity Tester/Tan Delta/ Power Factor Tester BLS-924
16..Fully Automatic Interface/ Surface Tensiometer BLS-971
17.Transformer Turn Ratio Tester BLS-901
18.Winding Resistance Tester BLS-10A
iii.Fuel Oil Testers
1.Quartz Tube Method Dark Petroleum Products Sulfur Analyzer BLS-1551
2.Petroleum Products Automatic Distillation Tester BLS-86
3.Self-ignition Point Tester BLS-659
4.Anti-fuel Oil Chlorine and Sulfur Tester BLS-433
5.Existent Gum in fuel Oils Tester by Jet Evaporation BLS-381
6.Engine Fuel Oil Existent Gum Tester BLS-509
7.Residual Fuels Total Sediment Tester BLS-4870
8.Aqueous Engine Coolants Freezing Point Tester BLS-1177
9.Engine Coolant Boiling Point Tester BLS-1120
1. Outside package: Standard export packing or neutral packing if needed, carton box, wooden case or upon request, packing carefully.
2. Inside package: strength film and foams.
Shipping Method: Air / Sea / Express(UPS, FEDEX, DHL, TNT, EMS, etc)
Chongqing Blossom Machinery Equipment Co., Ltd is located in Chongqing, one of the municipalities directly under the central government. The main products include instrument and apparatus, mechanical machinery such as liquid purification equipment, etc. The equipment is widely applied in construction, petroleum, mechanical, ships, pharmaceutical, lab test and edible oil processing, etc.
Our Laboratory
CE Certificate
1. What's the payment method?
Payment can be done by cash T/T, L/C, Western Union, Alibaba Trade Assurance,etc.
2. How long is the delivery period?
Generally it takes about 10 working days for production and then the delivery will be done timely.
3.What's the package made of?
The package is made of international export standard wooden case.
4.What's the delivery method?
By train, by air, by sea, by truck, by express(TNT, DHL, FedEx, Ups, etc).
5. How long is the guarantee period?
The guarantee period is 2 years due to the product quality problems itself.
6.What services can you provide?
Online support through email, telephone, Whatsapp or other communication method; onsite taining and installation if you need;filed maintenance and repair, technical video support, etc.
){kind=link}