| Customization: | Available |
|---|---|
| After-sales Service: | Online Support Through Email, Telephone, Whatsapp |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ASTM D892 Lube Oil Foaming Characteristic Tester
Application
The instrument is designed and manufactured according to ASTM D892, IP145 and the requirements of the People's Republic of China standard GB/T 12579 Lubricating Oil Foam Properties Determination Method. It is suitable to determine the foam properties of lubricating oil and measure the foaming tendency of the lubASTM D892 Lubricant Oil Oil Foaming Characteristics Test Equipmente oil and the stability of the foam.
Features
1.Adopts integrated structure, including three parts: the low temperature constant temperature part and its control part, and the high temperature constant temperature part and its control part. The low temperature constant temperature part is equipped with portable cooler.
2. After the constant temperature point has been set, the instrument will enter into constant temperature state automatically. The temperature controller is equipped with parameter correction function. If the displayed temperature deviates from the temperature measured by the thermometer, the required temperature can be achieved through correction.
3. The instrument has automatic timing and alarm function. When turn on the timing switch after reaches the constant temperature point, the timer will automatically time and start to blow at the same time. 5 minutes later,the air will be automatically turned off and kept static for 10 minutes. 10 minutes later, the instrument will alarm automatically to indicate that the current sample test is over.
Technical Parameters
|
Working power |
AC (220 ± 10%) V, 50Hz(can be customized) |
|
Constant temperature heating power |
650W |
|
Auxiliary heating power |
1000W |
|
Cooling power |
500W |
|
Air flow |
(94 ± 5) ml / min, adjustable |
|
Temperature control range |
Room temperature-99.9ºC(high temperature bath) |
|
Temperature control accuracy |
± 0.5ºC |
|
Timer |
5 minutes and 10 minutes,accurate to the second |
|
Timing accuracy |
0.01% + 0.05s (at 20ºC) |
|
Ambient temperature |
-10 to 40ºC |
|
Relative humidity |
≤85% |
|
Total power consumption |
≤2700W |
|
Outer dimensions |
690×460×700mm(L×W×H) |
|
Cooler dimensions |
400×450×300mm(L×W×H) |
1. Anti-rust Grease Salt Spray Corrosion Tester BLS-117
2.Lube Oil Air Release Value Tester BLS-3427
3.Petroleum Products Demulsification/Water Separability Tester BLS-1401
4.Vehicle Gear Oil Channel Point Tester BLS-0030
5.Lube Oil Oxidation Stability Tester (Rotary Oxygen Bomb Method)BLS-942
6. Lube Oil Foaming Characteristics Tester BLS-892
7.Petroleum Products Ash Content Tester BLS-482
8.Petroleum Products and Additives Mechanical Impurity Tester BLS-473
9.Liquid Phase Corrosion/ Rust Preventing Characteristics Tester BLS-665
10.Automatic Lubricating Oil Grease Four-ball Friction Tester BLS-2783
11.Lubricating Grease Sulfated Ash Content Tester BLS-874
12.Water Content Tester by Distillation BLS-95
13.Petroleum Products Water Soluble Acid and Alkalis Tester BLS-259
14.Engine Oil CCS Cold Cranking Simulator/Apparent Viscosity Tester BLS-5293
15.Noack Method Lubricating Oil Grease Evaporation Loss Tester BLS-5800
16.Lubricating Oil Grease Evaporation Loss Tester BLS-972
17.Lubricating Oil Insolubles Tester BLS-893
18.Inhibited Mineral Oils Oxidation Characteristics Tester BLS-943
19.Dropping Point Tester of Lubricating Grease Over Wide Temperature Range BLS-2265
20.Pressure Differential Scanning Calorimetry (PDSC) Lubricating Oil Oxidation Induction Time Tester BLS-6186
21.Lubricating Grease Dropping Point Tester BLS-566
22.Lubricating Grease Cone Penetration Tester BLS-217
1. Outside package: Standard export packing or neutral packing if needed, carton box, wooden case or upon request, packing carefully.
2. Inside package: strength film and foams.
Shipping Method: Air / Sea / Express(UPS, FEDEX, DHL, TNT, EMS, etc)
Chongqing Blossom Machinery Equipment Co., Ltd is located in Chongqing, one of the municipalities directly under the central government. The main products include instrument and apparatus, mechanical machinery such as liquid purification equipment, etc. The equipment is widely applied in construction, petroleum, mechanical, ships, pharmaceutical, lab test and edible oil processing, etc.
Testing Machines in stock
1. What's the payment method?
Payment can be done by cash T/T, L/C, Western Union, Alibaba Trade Assurance,etc.
2. How long is the delivery period?
Generally it takes about 10 working days for production and then the delivery will be done timely.
3.What's the package made of?
The package is made of international export standard wooden case.
4.What's the delivery method?
By train, by air, by sea, by truck, by express(TNT, DHL, FedEx, Ups, etc).
5. How long is the guarantee period?
The guarantee period is 2 years due to the product quality problems itself.
6.What services can you provide?
Online support through email, telephone, Whatsapp or other communication method; onsite taining and installation if you need;filed maintenance and repair, technical video support, etc.
){kind=link}