Pressure Differential Scanning Calorimetry (PDSC) Lubricating Oil Oxidation Induction Time Tester

Product Description

Product Description

Pressure Differential Scanning Calorimetry (PDSC) Lubricating Oil Oxidation Induction Time Tester

 

 

Application
 

The instrument Differential Scanning Calorimetry (DSC), as a classical thermal analysis method for the thermal effect of programmable temperature, is used in various research and development, process optimization, quality control and failure analysis of various materials and chemistry. Through DSC method, we can study the phase transition of inorganic materials, the melting of polymer materials, the crystallization process, the polymorphism of drugs, and the solid/liquid phase ratio of foods such as oils and grease.

Application Example

Measure physical and chemical changes related to heat, such as glass transition temperature, melting point, melting temperature, crystallization and crystallization heat, phase transition heat, product thermal stability, solidification/crosslinking, oxidation induction period, reaction kinetics, and specific heat,etc. Note: The thermal stability test during the oxidation induction period is applicable to the national standard G B / T 1 7 3 9 1 - 1 9 9 8 .

 

Working Principle

Differential scanning calorimetry is a technique in which the power difference between a substance and a reference changes with temperature under program temperature control. The instrument is mainly composed of heating furnace, host, microvolt amplifier, A/D converter, data acquisition system, gas flow control system, computer, printer and other components. The test results are processed by computer data processing system.  

 

Main Features

1.Simple operation, no need for any testing experience, only a small amount of training;

2.Software for computer screens of various resolutions;

3.Dual temperature probe for high accuracy and repeatability;

4.Support unattended operation during the experimental process;

5.Digital gas mass flow meter automatically switches two gas flows;

6.Software can be upgraded online for free;

7.Seven-inch large-screen LCD display with clear displayed maps and curves;

8.Built-in foreign imported high sensitivity differential thermal sensor with higher precision, through which weak signals can be measured. 

 

Technical Parameters

 

DSC Range	0~±200mW
Temperature range	Room temperature~500ºC
Temperature rising rate	0.1~50ºC/min
Temperature resolution	0.01ºC
Temperature accuracy	±0.1ºC
Temperature repeatability	±0.1ºC
DSC accuracy	±2%
DSC resolution	0.001mW
Temperature control mode	Automatic control during whole process
Curve scanning	Temperature increased scanning
Display	7-inch large-screen LCD display
Working power supply	AC220V, 50Hz/60Hz, single phase(customizable)
Net Dimensions(L×W×H)	460×350×270mm
Net Weight	14.5kg
Packing Dimensions(L×W×H)	580mm×450mm×400mm
Gross Weight	18kg

 

   

Minimum hardware configuration requirements	Intel Celeron Dual-Core; 2GB system memory; Resolution 1366*768 pixels or higher Hard disk 500G
Minimum software configuration requirements	Win2000 or higher system Adobe PDF reader

 

 

Related Oil Testers

1. Anti-rust Grease Salt Spray Corrosion Tester BLS-117
2.Lube Oil Air Release Value Tester BLS-3427
3.Petroleum Products Demulsification/Water Separability Tester BLS-1401
4.Vehicle Gear Oil Channel Point Tester BLS-0030
5.Lube Oil Oxidation Stability Tester (Rotary Oxygen Bomb Method)BLS-942
6. Lube Oil Foaming Characteristics Tester BLS-892
7.Petroleum Products Ash Content Tester BLS-482
8.Petroleum Products and Additives Mechanical Impurity Tester BLS-473
9.Liquid Phase Corrosion/ Rust Preventing Characteristics Tester BLS-665
10.Automatic Lubricating Oil Grease Four-ball Friction Tester BLS-2783
11.Lubricating Grease Sulfated Ash Content Tester BLS-874
12.Water Content Tester by Distillation BLS-95
13.Petroleum Products Water Soluble Acid and Alkalis Tester BLS-259
14.Engine Oil CCS Cold Cranking Simulator/Apparent Viscosity Tester BLS-5293
15.Noack Method Lubricating Oil Grease Evaporation Loss Tester BLS-5800
16.Lubricating Oil Grease Evaporation Loss Tester BLS-972
17.Lubricating Oil Insolubles Tester BLS-893
18.Inhibited Mineral Oils Oxidation Characteristics Tester BLS-943
19.Dropping Point Tester of Lubricating Grease Over Wide Temperature Range BLS-2265
20.Pressure Differential Scanning Calorimetry (PDSC) Lubricating Oil Oxidation Induction Time Tester BLS-6186
21.Lubricating Grease Dropping Point Tester BLS-566
22.Lubricating Grease Cone Penetration Tester BLS-217

Packaging & Shipping

 

1. Outside package: Standard export packing or neutral packing if needed, carton box, wooden case or upon request, packing carefully.

2. Inside package: strength film and foams.

Shipping Method: Air / Sea / Express(UPS, FEDEX, DHL, TNT, EMS, etc)

Company Profile

 

 Chongqing Blossom Machinery Equipment Co., Ltd is located in Chongqing, one of the municipalities directly under the central government. The main products include instrument and apparatus, mechanical machinery such as liquid purification equipment, etc. The equipment is widely applied in construction, petroleum, mechanical, ships, pharmaceutical, lab test and edible oil processing, etc.

Testing Machines in stock

FAQ

1. What's the payment method?
Payment can be done by cash T/T, L/C, Western Union, ****** Trade Assurance,etc.

2. How long is the delivery period?
Generally it takes about 10 working days for production and then the delivery will be done timely.

3.What's the package made of?
The package is made of international export standard wooden case.

4.What's the delivery method?
By train, by air, by sea, by truck, by express(TNT, DHL, FedEx, Ups, etc).

5. How long is the guarantee period?
The guarantee period is 2 years due to the product quality problems itself.

6.What services can you provide?
Online support through email, telephone, Whatsapp or other communication method; onsite taining and installation if you need;filed maintenance and repair, technical video support, etc.